Python quopri 模块，encode() 实例源码

我们从Python开源项目中，提取了以下50个代码示例，用于说明如何使用quopri.encode()。

项目：kinect-2-libras 作者：inessadl | 项目源码 | 文件源码

def encode(input, output, encoding):
    """Encode common content-transfer-encodings (base64, quopri, uuencode)."""
    if encoding == 'base64':
        import base64
        return base64.encode(input, output)
    if encoding == 'quoted-printable':
        import quopri
        return quopri.encode(input, output, 0)
    if encoding in ('uuencode', 'x-uuencode', 'uue', 'x-uue'):
        import uu
        return uu.encode(input, output)
    if encoding in ('7bit', '8bit'):
        return output.write(input.read())
    if encoding in encodetab:
        pipethrough(input, encodetab[encoding], output)
    else:
        raise ValueError, \
              'unknown Content-Transfer-Encoding: %s' % encoding

# The following is no longer used for standard encodings

# XXX This requires that uudecode and mmencode are in $PATH

项目：hostapd-mana 作者：adde88 | 项目源码 | 文件源码

def encode(input, output, encoding):
    """Encode common content-transfer-encodings (base64, quopri, uuencode)."""
    if encoding == 'base64':
        import base64
        return base64.encode(input, output)
    if encoding == 'quoted-printable':
        import quopri
        return quopri.encode(input, output, 0)
    if encoding in ('uuencode', 'x-uuencode', 'uue', 'x-uue'):
        import uu
        return uu.encode(input, output)
    if encoding in ('7bit', '8bit'):
        return output.write(input.read())
    if encoding in encodetab:
        pipethrough(input, encodetab[encoding], output)
    else:
        raise ValueError, \
              'unknown Content-Transfer-Encoding: %s' % encoding

# The following is no longer used for standard encodings

# XXX This requires that uudecode and mmencode are in $PATH

项目：Intranet-Penetration 作者：yuxiaokui | 项目源码 | 文件源码

def encode(input, output, encoding):
    """Encode common content-transfer-encodings (base64, quopri, uuencode)."""
    if encoding == 'base64':
        import base64
        return base64.encode(input, output)
    if encoding == 'quoted-printable':
        import quopri
        return quopri.encode(input, output, 0)
    if encoding in ('uuencode', 'x-uuencode', 'uue', 'x-uue'):
        import uu
        return uu.encode(input, output)
    if encoding in ('7bit', '8bit'):
        return output.write(input.read())
    if encoding in encodetab:
        pipethrough(input, encodetab[encoding], output)
    else:
        raise ValueError, \
              'unknown Content-Transfer-Encoding: %s' % encoding

# The following is no longer used for standard encodings

# XXX This requires that uudecode and mmencode are in $PATH

项目：MKFQ 作者：maojingios | 项目源码 | 文件源码

def encode(input, output, encoding):
    """Encode common content-transfer-encodings (base64, quopri, uuencode)."""
    if encoding == 'base64':
        import base64
        return base64.encode(input, output)
    if encoding == 'quoted-printable':
        import quopri
        return quopri.encode(input, output, 0)
    if encoding in ('uuencode', 'x-uuencode', 'uue', 'x-uue'):
        import uu
        return uu.encode(input, output)
    if encoding in ('7bit', '8bit'):
        return output.write(input.read())
    if encoding in encodetab:
        pipethrough(input, encodetab[encoding], output)
    else:
        raise ValueError, \
              'unknown Content-Transfer-Encoding: %s' % encoding

# The following is no longer used for standard encodings

# XXX This requires that uudecode and mmencode are in $PATH

项目：oil 作者：oilshell | 项目源码 | 文件源码

def encode(input, output, encoding):
    """Encode common content-transfer-encodings (base64, quopri, uuencode)."""
    if encoding == 'base64':
        import base64
        return base64.encode(input, output)
    if encoding == 'quoted-printable':
        import quopri
        return quopri.encode(input, output, 0)
    if encoding in ('uuencode', 'x-uuencode', 'uue', 'x-uue'):
        import uu
        return uu.encode(input, output)
    if encoding in ('7bit', '8bit'):
        return output.write(input.read())
    if encoding in encodetab:
        pipethrough(input, encodetab[encoding], output)
    else:
        raise ValueError, \
              'unknown Content-Transfer-Encoding: %s' % encoding

# The following is no longer used for standard encodings

# XXX This requires that uudecode and mmencode are in $PATH

项目：python2-tracer 作者：extremecoders-re | 项目源码 | 文件源码

def encode(input, output, encoding):
    """Encode common content-transfer-encodings (base64, quopri, uuencode)."""
    if encoding == 'base64':
        import base64
        return base64.encode(input, output)
    if encoding == 'quoted-printable':
        import quopri
        return quopri.encode(input, output, 0)
    if encoding in ('uuencode', 'x-uuencode', 'uue', 'x-uue'):
        import uu
        return uu.encode(input, output)
    if encoding in ('7bit', '8bit'):
        return output.write(input.read())
    if encoding in encodetab:
        pipethrough(input, encodetab[encoding], output)
    else:
        raise ValueError, \
              'unknown Content-Transfer-Encoding: %s' % encoding

# The following is no longer used for standard encodings

# XXX This requires that uudecode and mmencode are in $PATH

项目：sslstrip-hsts-openwrt 作者：adde88 | 项目源码 | 文件源码

def encode(input, output, encoding):
    """Encode common content-transfer-encodings (base64, quopri, uuencode)."""
    if encoding == 'base64':
        import base64
        return base64.encode(input, output)
    if encoding == 'quoted-printable':
        import quopri
        return quopri.encode(input, output, 0)
    if encoding in ('uuencode', 'x-uuencode', 'uue', 'x-uue'):
        import uu
        return uu.encode(input, output)
    if encoding in ('7bit', '8bit'):
        return output.write(input.read())
    if encoding in encodetab:
        pipethrough(input, encodetab[encoding], output)
    else:
        raise ValueError, \
              'unknown Content-Transfer-Encoding: %s' % encoding

# The following is no longer used for standard encodings

# XXX This requires that uudecode and mmencode are in $PATH

项目：xxNet 作者：drzorm | 项目源码 | 文件源码

def encode(input, output, encoding):
    """Encode common content-transfer-encodings (base64, quopri, uuencode)."""
    if encoding == 'base64':
        import base64
        return base64.encode(input, output)
    if encoding == 'quoted-printable':
        import quopri
        return quopri.encode(input, output, 0)
    if encoding in ('uuencode', 'x-uuencode', 'uue', 'x-uue'):
        import uu
        return uu.encode(input, output)
    if encoding in ('7bit', '8bit'):
        return output.write(input.read())
    if encoding in encodetab:
        pipethrough(input, encodetab[encoding], output)
    else:
        raise ValueError, \
              'unknown Content-Transfer-Encoding: %s' % encoding

# The following is no longer used for standard encodings

# XXX This requires that uudecode and mmencode are in $PATH

项目：pefile.pypy 作者：cloudtracer | 项目源码 | 文件源码

def encode(input, output, encoding):
    """Encode common content-transfer-encodings (base64, quopri, uuencode)."""
    if encoding == 'base64':
        import base64
        return base64.encode(input, output)
    if encoding == 'quoted-printable':
        import quopri
        return quopri.encode(input, output, 0)
    if encoding in ('uuencode', 'x-uuencode', 'uue', 'x-uue'):
        import uu
        return uu.encode(input, output)
    if encoding in ('7bit', '8bit'):
        return output.write(input.read())
    if encoding in encodetab:
        pipethrough(input, encodetab[encoding], output)
    else:
        raise ValueError, \
              'unknown Content-Transfer-Encoding: %s' % encoding

# The following is no longer used for standard encodings

# XXX This requires that uudecode and mmencode are in $PATH

项目：land-leg-PY 作者：xfkencon | 项目源码 | 文件源码

def encode(input, output, encoding):
    """Encode common content-transfer-encodings (base64, quopri, uuencode)."""
    if encoding == 'base64':
        import base64
        return base64.encode(input, output)
    if encoding == 'quoted-printable':
        import quopri
        return quopri.encode(input, output, 0)
    if encoding in ('uuencode', 'x-uuencode', 'uue', 'x-uue'):
        import uu
        return uu.encode(input, output)
    if encoding in ('7bit', '8bit'):
        return output.write(input.read())
    if encoding in encodetab:
        pipethrough(input, encodetab[encoding], output)
    else:
        raise ValueError, \
              'unknown Content-Transfer-Encoding: %s' % encoding

# The following is no longer used for standard encodings

# XXX This requires that uudecode and mmencode are in $PATH

项目：ndk-python 作者：gittor | 项目源码 | 文件源码

def encode(input, output, encoding):
    """Encode common content-transfer-encodings (base64, quopri, uuencode)."""
    if encoding == 'base64':
        import base64
        return base64.encode(input, output)
    if encoding == 'quoted-printable':
        import quopri
        return quopri.encode(input, output, 0)
    if encoding in ('uuencode', 'x-uuencode', 'uue', 'x-uue'):
        import uu
        return uu.encode(input, output)
    if encoding in ('7bit', '8bit'):
        return output.write(input.read())
    if encoding in encodetab:
        pipethrough(input, encodetab[encoding], output)
    else:
        raise ValueError, \
              'unknown Content-Transfer-Encoding: %s' % encoding

# The following is no longer used for standard encodings

# XXX This requires that uudecode and mmencode are in $PATH

项目：python- 作者：secondtonone1 | 项目源码 | 文件源码

def quopri_encode(input, errors='strict'):
    assert errors == 'strict'
    f = BytesIO(input)
    g = BytesIO()
    quopri.encode(f, g, quotetabs=True)
    return (g.getvalue(), len(input))

项目：python- 作者：secondtonone1 | 项目源码 | 文件源码

def encode(self, input, errors='strict'):
        return quopri_encode(input, errors)

项目：python- 作者：secondtonone1 | 项目源码 | 文件源码

def encode(self, input, final=False):
        return quopri_encode(input, self.errors)[0]

项目：python- 作者：secondtonone1 | 项目源码 | 文件源码

def getregentry():
    return codecs.CodecInfo(
        name='quopri',
        encode=quopri_encode,
        decode=quopri_decode,
        incrementalencoder=IncrementalEncoder,
        incrementaldecoder=IncrementalDecoder,
        streamwriter=StreamWriter,
        streamreader=StreamReader,
        _is_text_encoding=False,
    )

项目：kinect-2-libras 作者：inessadl | 项目源码 | 文件源码

def quopri_encode(input, errors='strict'):
    """Encode the input, returning a tuple (output object, length consumed).

    errors defines the error handling to apply. It defaults to
    'strict' handling which is the only currently supported
    error handling for this codec.

    """
    assert errors == 'strict'
    # using str() because of cStringIO's Unicode undesired Unicode behavior.
    f = StringIO(str(input))
    g = StringIO()
    quopri.encode(f, g, 1)
    output = g.getvalue()
    return (output, len(input))

项目：kinect-2-libras 作者：inessadl | 项目源码 | 文件源码

def encode(self, input,errors='strict'):
        return quopri_encode(input,errors)

项目：kinect-2-libras 作者：inessadl | 项目源码 | 文件源码

def encode(self, input, final=False):
        return quopri_encode(input, self.errors)[0]

项目：kinect-2-libras 作者：inessadl | 项目源码 | 文件源码

def getregentry():
    return codecs.CodecInfo(
        name='quopri',
        encode=quopri_encode,
        decode=quopri_decode,
        incrementalencoder=IncrementalEncoder,
        incrementaldecoder=IncrementalDecoder,
        streamwriter=StreamWriter,
        streamreader=StreamReader,
    )

项目：swjtu-pyscraper 作者：Desgard | 项目源码 | 文件源码

def quopri_encode(input, errors='strict'):
    """Encode the input, returning a tuple (output object, length consumed).

    errors defines the error handling to apply. It defaults to
    'strict' handling which is the only currently supported
    error handling for this codec.

    """
    assert errors == 'strict'
    # using str() because of cStringIO's Unicode undesired Unicode behavior.
    f = StringIO(str(input))
    g = StringIO()
    quopri.encode(f, g, quotetabs=True)
    output = g.getvalue()
    return (output, len(input))

项目：swjtu-pyscraper 作者：Desgard | 项目源码 | 文件源码

def encode(self, input,errors='strict'):
        return quopri_encode(input,errors)

项目：swjtu-pyscraper 作者：Desgard | 项目源码 | 文件源码

def encode(self, input, final=False):
        return quopri_encode(input, self.errors)[0]

项目：swjtu-pyscraper 作者：Desgard | 项目源码 | 文件源码

def getregentry():
    return codecs.CodecInfo(
        name='quopri',
        encode=quopri_encode,
        decode=quopri_decode,
        incrementalencoder=IncrementalEncoder,
        incrementaldecoder=IncrementalDecoder,
        streamwriter=StreamWriter,
        streamreader=StreamReader,
        _is_text_encoding=False,
    )

项目：hostapd-mana 作者：adde88 | 项目源码 | 文件源码

def quopri_encode(input, errors='strict'):
    """Encode the input, returning a tuple (output object, length consumed).

    errors defines the error handling to apply. It defaults to
    'strict' handling which is the only currently supported
    error handling for this codec.

    """
    assert errors == 'strict'
    # using str() because of cStringIO's Unicode undesired Unicode behavior.
    f = StringIO(str(input))
    g = StringIO()
    quopri.encode(f, g, 1)
    output = g.getvalue()
    return (output, len(input))

项目：hostapd-mana 作者：adde88 | 项目源码 | 文件源码

def encode(self, input,errors='strict'):
        return quopri_encode(input,errors)

项目：hostapd-mana 作者：adde88 | 项目源码 | 文件源码

def encode(self, input, final=False):
        return quopri_encode(input, self.errors)[0]

项目：hostapd-mana 作者：adde88 | 项目源码 | 文件源码

def getregentry():
    return codecs.CodecInfo(
        name='quopri',
        encode=quopri_encode,
        decode=quopri_decode,
        incrementalencoder=IncrementalEncoder,
        incrementaldecoder=IncrementalDecoder,
        streamwriter=StreamWriter,
        streamreader=StreamReader,
    )