Python setuptools.extern.six.moves.configparser 模块,Error() 实例源码

我们从Python开源项目中,提取了以下50个代码示例,用于说明如何使用setuptools.extern.six.moves.configparser.Error()

项目:python-    作者:secondtonone1    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:my-first-blog    作者:AnkurBegining    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:swjtu-pyscraper    作者:Desgard    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:noc-orchestrator    作者:DirceuSilvaLabs    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:jira_worklog_scanner    作者:pgarneau    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:zanph    作者:zanph    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        cfg = configparser.RawConfigParser(
            {'version': '', 'target_version': ''})
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:Sci-Finder    作者:snverse    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:Sci-Finder    作者:snverse    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:ascii-art-py    作者:blinglnav    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:aws-cfn-plex    作者:lordmuffin    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:RPoint    作者:george17-meet    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:AshsSDK    作者:thehappydinoa    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:habilitacion    作者:GabrielBD    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:flickr_downloader    作者:Denisolt    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:threatdetectionservice    作者:flyballlabs    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:oa_qian    作者:sunqb    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:Indushell    作者:SecarmaLabs    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:SHAREOpenRefineWkshop    作者:cmh2166    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:Liljimbo-Chatbot    作者:chrisjim316    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:leetcode    作者:thomasyimgit    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:flask_system    作者:prashasy    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:news-for-good    作者:thecodinghub    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:CaScale    作者:Thatsillogical    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:ShelbySearch    作者:Agentscreech    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:where2live    作者:fbessez    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:pyetje    作者:rorlika    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:respeaker_virtualenv    作者:respeaker    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:Problematica-public    作者:TechMaz    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:bawk    作者:jttwnsnd    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:infinite-lorem-ipsum    作者:patjm1992    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:fieldsight-kobocat    作者:awemulya    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:covar_me_app    作者:CovarMe    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:wttd-dojo    作者:diegosorrilha    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:wttd-dojo    作者:diegosorrilha    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:python-beginner-tutorial    作者:mak1323    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:WebAct    作者:CreatCodeBuild    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:infiblog    作者:RajuKoushik    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:python-on    作者:hemangsk    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:python-on    作者:hemangsk    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:python-on    作者:hemangsk    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:bang_pivotal    作者:thealanberman    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:remoteControlPPT    作者:htwenning    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:yml2json    作者:neo1104    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:ASE-Fall2016    作者:Dai0526    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:APIGateway    作者:n89nanda    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:mibici-tools    作者:regenhans    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:QA4LOV    作者:gatemezing    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        cfg = configparser.RawConfigParser(
            {'version': '', 'target_version': ''})
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:webapp    作者:superchilli    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:talk-to-obama    作者:krrishd    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()
项目:metrics    作者:Jeremy-Friedman    | 项目源码 | 文件源码
def extract_wininst_cfg(dist_filename):
    """Extract configuration data from a bdist_wininst .exe

    Returns a configparser.RawConfigParser, or None
    """
    f = open(dist_filename, 'rb')
    try:
        endrec = zipfile._EndRecData(f)
        if endrec is None:
            return None

        prepended = (endrec[9] - endrec[5]) - endrec[6]
        if prepended < 12:  # no wininst data here
            return None
        f.seek(prepended - 12)

        tag, cfglen, bmlen = struct.unpack("<iii", f.read(12))
        if tag not in (0x1234567A, 0x1234567B):
            return None  # not a valid tag

        f.seek(prepended - (12 + cfglen))
        init = {'version': '', 'target_version': ''}
        cfg = configparser.RawConfigParser(init)
        try:
            part = f.read(cfglen)
            # Read up to the first null byte.
            config = part.split(b'\0', 1)[0]
            # Now the config is in bytes, but for RawConfigParser, it should
            #  be text, so decode it.
            config = config.decode(sys.getfilesystemencoding())
            cfg.readfp(six.StringIO(config))
        except configparser.Error:
            return None
        if not cfg.has_section('metadata') or not cfg.has_section('Setup'):
            return None
        return cfg

    finally:
        f.close()