Python yourapplication 模块，default_config() 实例源码

我们从Python开源项目中，提取了以下50个代码示例，用于说明如何使用yourapplication.default_config()。

项目：kaira 作者：mulonemartin | 项目源码 | 文件源码

def from_object(self, obj):
        """Update the values from the given object.
        Objects are usually either modules or classes.
        Just the uppercase variables in that object are stored in the config.
        Example usage::
            from yourapplication import default_config
            app.config.from_object(default_config)
        You should not use this function to load the actual configuration but
        rather configuration defaults. The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.
        :param obj: an object holding the configuration
        """
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：sanic 作者：channelcat | 项目源码 | 文件源码

def from_object(self, obj):
        """Update the values from the given object.
        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults. The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an object holding the configuration
        """
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：zenchmarks 作者：squeaky-pl | 项目源码 | 文件源码

def from_object(self, obj):
        """Update the values from the given object.
        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults. The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an object holding the configuration
        """
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：mach9 作者：silver-castle | 项目源码 | 文件源码

def from_object(self, obj):
        """Update the values from the given object.
        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults. The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an object holding the configuration
        """
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：Flask_Blog 作者：sugarguo | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：swjtu-pyscraper 作者：Desgard | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：zanph 作者：zanph | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：Sci-Finder 作者：snverse | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes. :meth:`from_object`
        loads only the uppercase attributes of the module/class. A ``dict``
        object will not work with :meth:`from_object` because the keys of a
        ``dict`` are not attributes of the ``dict`` class.

        Example of module-based configuration::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        See :ref:`config-dev-prod` for an example of class-based configuration
        using :meth:`from_object`.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：Sci-Finder 作者：snverse | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes. :meth:`from_object`
        loads only the uppercase attributes of the module/class. A ``dict``
        object will not work with :meth:`from_object` because the keys of a
        ``dict`` are not attributes of the ``dict`` class.

        Example of module-based configuration::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        See :ref:`config-dev-prod` for an example of class-based configuration
        using :meth:`from_object`.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：Texty 作者：sarthfrey | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：arithmancer 作者：google | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：tesismometro 作者：joapaspe | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：RPoint 作者：george17-meet | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes. :meth:`from_object`
        loads only the uppercase attributes of the module/class. A ``dict``
        object will not work with :meth:`from_object` because the keys of a
        ``dict`` are not attributes of the ``dict`` class.

        Example of module-based configuration::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        See :ref:`config-dev-prod` for an example of class-based configuration
        using :meth:`from_object`.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：isni-reconcile 作者：cmh2166 | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：flasky 作者：RoseOu | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：oa_qian 作者：sunqb | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：RealtimePythonChat 作者：quangtqag | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes. :meth:`from_object`
        loads only the uppercase attributes of the module/class. A ``dict``
        object will not work with :meth:`from_object` because the keys of a
        ``dict`` are not attributes of the ``dict`` class.

        Example of module-based configuration::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        See :ref:`config-dev-prod` for an example of class-based configuration
        using :meth:`from_object`.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：Indushell 作者：SecarmaLabs | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes. :meth:`from_object`
        loads only the uppercase attributes of the module/class. A ``dict``
        object will not work with :meth:`from_object` because the keys of a
        ``dict`` are not attributes of the ``dict`` class.

        Example of module-based configuration::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        See :ref:`config-dev-prod` for an example of class-based configuration
        using :meth:`from_object`.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：Liljimbo-Chatbot 作者：chrisjim316 | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes. :meth:`from_object`
        loads only the uppercase attributes of the module/class. A ``dict``
        object will not work with :meth:`from_object` because the keys of a
        ``dict`` are not attributes of the ``dict`` class.

        Example of module-based configuration::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        See :ref:`config-dev-prod` for an example of class-based configuration
        using :meth:`from_object`.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：flask_system 作者：prashasy | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes. :meth:`from_object`
        loads only the uppercase attributes of the module/class. A ``dict``
        object will not work with :meth:`from_object` because the keys of a
        ``dict`` are not attributes of the ``dict`` class.

        Example of module-based configuration::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        See :ref:`config-dev-prod` for an example of class-based configuration
        using :meth:`from_object`.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：chihu 作者：yelongyu | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：ShelbySearch 作者：Agentscreech | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes. :meth:`from_object`
        loads only the uppercase attributes of the module/class. A ``dict``
        object will not work with :meth:`from_object` because the keys of a
        ``dict`` are not attributes of the ``dict`` class.

        Example of module-based configuration::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        See :ref:`config-dev-prod` for an example of class-based configuration
        using :meth:`from_object`.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：pyetje 作者：rorlika | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：tellmeabout.coffee 作者：billyfung | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：FileStoreGAE 作者：liantian-cn | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes. :meth:`from_object`
        loads only the uppercase attributes of the module/class. A ``dict``
        object will not work with :meth:`from_object` because the keys of a
        ``dict`` are not attributes of the ``dict`` class.

        Example of module-based configuration::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        See :ref:`config-dev-prod` for an example of class-based configuration
        using :meth:`from_object`.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：bawk 作者：jttwnsnd | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：infinite-lorem-ipsum 作者：patjm1992 | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：Price-Comparator 作者：Thejas-1 | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：MIGPU 作者：scuAILab | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：python-group-proj 作者：Sharcee | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes. :meth:`from_object`
        loads only the uppercase attributes of the module/class. A ``dict``
        object will not work with :meth:`from_object` because the keys of a
        ``dict`` are not attributes of the ``dict`` class.

        Example of module-based configuration::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        See :ref:`config-dev-prod` for an example of class-based configuration
        using :meth:`from_object`.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：islam-buddy 作者：hamir | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：covar_me_app 作者：CovarMe | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：Flask-NvRay-Blog 作者：rui7157 | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：Flask-NvRay-Blog 作者：rui7157 | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：Callandtext 作者：iaora | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：My-Web-Server-Framework-With-Python2.7 作者：syjsu | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：PornGuys 作者：followloda | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes. :meth:`from_object`
        loads only the uppercase attributes of the module/class. A ``dict``
        object will not work with :meth:`from_object` because the keys of a
        ``dict`` are not attributes of the ``dict`` class.

        Example of module-based configuration::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        See :ref:`config-dev-prod` for an example of class-based configuration
        using :meth:`from_object`.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：python_ddd_flask 作者：igorvinnicius | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：remoteControlPPT 作者：htwenning | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：jieba-GAE 作者：liantian-cn | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes. :meth:`from_object`
        loads only the uppercase attributes of the module/class. A ``dict``
        object will not work with :meth:`from_object` because the keys of a
        ``dict`` are not attributes of the ``dict`` class.

        Example of module-based configuration::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        See :ref:`config-dev-prod` for an example of class-based configuration
        using :meth:`from_object`.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：goulash-bot 作者：damdev | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：ASE-Fall2016 作者：Dai0526 | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：APIGateway 作者：n89nanda | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：QA4LOV 作者：gatemezing | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：webapp 作者：superchilli | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes. :meth:`from_object`
        loads only the uppercase attributes of the module/class. A ``dict``
        object will not work with :meth:`from_object` because the keys of a
        ``dict`` are not attributes of the ``dict`` class.

        Example of module-based configuration::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        See :ref:`config-dev-prod` for an example of class-based configuration
        using :meth:`from_object`.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：Sudoku-Solver 作者：ayush1997 | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：QualquerMerdaAPI 作者：tiagovizoto | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes. :meth:`from_object`
        loads only the uppercase attributes of the module/class. A ``dict``
        object will not work with :meth:`from_object` because the keys of a
        ``dict`` are not attributes of the ``dict`` class.

        Example of module-based configuration::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        See :ref:`config-dev-prod` for an example of class-based configuration
        using :meth:`from_object`.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：Flask-SocketIO 作者：cutedogspark | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：metrics 作者：Jeremy-Friedman | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)

项目：metrics 作者：Jeremy-Friedman | 项目源码 | 文件源码

def from_object(self, obj):
        """Updates the values from the given object.  An object can be of one
        of the following two types:

        -   a string: in this case the object with that name will be imported
        -   an actual object reference: that object is used directly

        Objects are usually either modules or classes.

        Just the uppercase variables in that object are stored in the config.
        Example usage::

            app.config.from_object('yourapplication.default_config')
            from yourapplication import default_config
            app.config.from_object(default_config)

        You should not use this function to load the actual configuration but
        rather configuration defaults.  The actual config should be loaded
        with :meth:`from_pyfile` and ideally from a location not within the
        package because the package might be installed system wide.

        :param obj: an import name or object
        """
        if isinstance(obj, string_types):
            obj = import_string(obj)
        for key in dir(obj):
            if key.isupper():
                self[key] = getattr(obj, key)